# ftp ***.***.***.*** Connected to ***.***.***.***. 220 jeikou FTP server ready. Name (***.***.***.***:root): 用戶名 331 Password required for 用戶名. Password: 230 User interbus logged in. ftp> ls 200 PORT command successful. 150 Opening ASCII mode data connection for file list. Q3Manager_manual_G.doc Q3Server.conf Q3_faq.txt pdb.pl test_cm.sh 226 Transfer complete. 71 bytes received in 0.009 seconds (7.70 Kbytes/s) ftp> bin 200 Type set to I. ftp> hash Hash mark printing on (8192 bytes/hash mark). ftp> mget Q3_faq.txt mget Q3_faq.txt? y 200 PORT command successful. 150 Opening BINARY mode data connection for Q3_faq.txt (1258 bytes). # 226 Transfer complete. local: Q3_faq.txt remote: Q3_faq.txt 1258 bytes received in 0.014 seconds (90.80 Kbytes/s) ftp> bye 221-You have transferred 1258 bytes in 1 files. 221-Total traffic for this session was 2035 bytes in 3 transfers. 221-Thank you for using the FTP service on jeikou. 221 Goodbye. # ls Q3_faq.txt local.cshrc local.login local.profile # ftp ***.***.***.*** Connected to ***.***.***.***. 220 jeikou FTP server ready. Name (10.2.1.45:root):用戶名 331 Password required for 用戶名. Password: 230 User interbus logged in. ftp> mput local.login mput local.login? y 200 PORT command successful. 到這裡就沒有反應了 重新連接文件沒有put成功... 請幫我分析一下，謝謝
