Samba 共享文件(夾)中文名比英文名 慢的問題

火星人 @ 2014-03-04 , reply:0


Samba 共享文件(夾)中文名比英文名 慢的問題

我最近發現我的Samba 共享比較的慢。
  後來發現是因為共享的文件(夾)是中文造成的。共享並沒有出現中文亂碼,但是卻會導致Samba複製文件變慢(很慢)。
  但如果我把文件(夾)名改成英文的,就不會有這樣的問題。
  請各位幫幫我啊,謝謝啦


;  username map = /etc/samba/smbusers

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
;   include = /etc/samba/smb.conf.%m

# Most people will find that this option gives better performance.
# See speed.txt and the manual pages for details
socket options = TCP_NODELAY IPTOS_LOWDELAY SO_SNDBUF=65536 SO_RCVBUF=65536
oplocks = no
level2 oplocks = no
# Configure Samba to use multiple interfaces
# If you have multiple network interfaces then you must list them
# here. See the man page for details.
;   interfaces = 192.168.12.2/24 192.168.13.2/24

# Configure remote browse list synchronisation here
#  request announcement to, or browse list sync from:
#   a specific host or from / to a whole subnet (see below)
;   remote browse sync = 192.168.3.25 192.168.5.255
# Cause this host to announce itself to local subnets here
;   remote announce = 192.168.1.255 192.168.2.44

# Browser Control Options:
# set local master to no if you don't want Samba to become a master
# browser on your network. Otherwise the normal election rules apply
;   local master = no

# OS Level determines the precedence of this server in master browser
# elections. The default value should be reasonable
;   os level = 33

# Domain Master specifies Samba to be the Domain Master Browser. This
# allows Samba to collate browse lists between subnets. Don't use this
# if you already have a Windows NT domain controller doing this job
;   domain master = yes

# Preferred Master causes Samba to force a local browser election on startup
# and gives it a slightly higher chance of winning the election
;   preferred master = yes

# Enable this if you want Samba to be a domain logon server for
# Windows95 workstations.
;   domain logons = yes

# if you enable domain logons then you may want a per-machine or
# per user logon script
# run a specific logon batch file per workstation (machine)
;   logon script = %m.bat
# run a specific logon batch file per username
;   logon script = %U.bat

# Where to store roving profiles (only for Win95 and WinNT)
#        %L substitutes for this servers netbios name, %U is username
#        You must uncomment the share below
;   logon path = \\%L\Profiles\%U

# All NetBIOS names must be resolved to IP Addresses
# 'Name Resolve Order' allows the named resolution mechanism to be specified
# the default order is "host lmhosts wins bcast". "host" means use the unix
# system gethostbyname() function call that will use either /etc/hosts OR
# DNS or NIS depending on the settings of /etc/host.config, /etc/nsswitch.conf
# and the /etc/resolv.conf file. "host" therefore is system configuration
# dependant. This parameter is most often of use to prevent DNS lookups
# in order to resolve NetBIOS names to IP Addresses. Use with care!
# The example below excludes use of name resolution for machines that are NOT
# on the local network segment
# - OR - are not deliberately to be known via lmhosts or via WINS.
; name resolve order = wins lmhosts bcast

# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable it's WINS Server
;   wins support = yes

# WINS Server - Tells the NMBD components of Samba to be a WINS Client
#   Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
;   wins server = w.x.y.z

# WINS Proxy - Tells Samba to answer name resolution queries on
# behalf of a non WINS capable client, for this to work there must be
# at least one  WINS Server on the network. The default is NO.
;   wins proxy = yes

# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
# via DNS nslookups. The built-in default for versions 1.9.17 is yes,
# this has been changed in version 1.9.18 to no.
   dns proxy = no

# Case Preservation can be handy - system default is _no_
# NOTE: These can be set on a per share basis
;  preserve case = no
;  short preserve case = no
# Default case is normally upper case for all DOS files
;  default case = lower
# Be very careful with case sensitivity - it can break things!
;  case sensitive = no

# These options are used by winbindd.
# The winbindd assignes the uid and gid automatically.
;  idmap uid = 40000-50000
;  idmap gid = 40000-50000

# These options adjust time operations to CIFS server
   dos filetime resolution = yes
   dos filetimes = yes

# These scripts are used for usrmgr.
# If you are using ldapsam, you must change from TDB to LDAP.
;  add user script = /usr/lib/samba/bin/useradd.sh TDB "%u" "smbusers"
;  delete user script = /usr/lib/samba/bin/userdel.sh TDB "%u"
;  add group script = /usr/lib/samba/bin/groupadd.sh TDB "%u"
;  delete group script = /usr/lib/samba/bin/groupdel.sh TDB "%u"
;  add user to group script = /usr/lib/samba/bin/addusergroup.sh TDB "%u" "%g"
;  delete user from group script = /usr/lib/samba/bin/delusergroup.sh TDB "%u" "%g"
;  set primary group script = /usr/lib/samba/bin/setpgroup.sh TDB "%u" %g"
;  add machine script = /usr/lib/samba/bin/addmachine.sh TDB "%u" "computers"
;  add share command = /usr/lib/samba/bin/addshare.sh

#============================ Share Definitions ==============================
   idmap uid = 16777216-33554431
   idmap gid = 16777216-33554431
   template shell = /bin/false
   winbind use default domain = no

   comment = Home Directories
   browseable = no
   writable = yes
   valid users = %S
   create mode = 0664
   directory mode = 0775


   comment = ¹²ÏíÎļþĿ¼
   path = /home/samba/public
   public = yes
   read only = yes
   # writeable = yes
   guest ok = yes


   comment = FTPĿ¼
   path = /data/ftp/ftpsite
   public = yes
   # read only = yes
   writeable = no
   browseable = yes
   guest ok = yes

# Un-comment the following and create the netlogon directory for Domain Logons
;
;   comment = Network Logon Service
;   path = /home/netlogon
;   guest ok = yes
;   writable = no
;   share modes = no


# Un-comment the following to provide a specific roving profile share
# the default is to use the user's home directory
;
;    path = /home/profiles
;    browseable = no
;    guest ok = yes


# NOTE: If you have a BSD-style print system there is no need to
# specifically define each individual printer
;
;   comment = All Printers
;   path = /var/spool/samba
;   browseable = no
# Set public = yes to allow user 'guest account' to print
;   guest ok = no
;   writable = no
;   printable = yes

# Samba stores the printer drivers for Windows in this share.

   comment = Printer Drivers Download Area
   path = /var/samba/printer
   browseable = yes
   guest ok = yes
   read only = yes
;  write list = root, @staff

# This one is useful for people to share files
;
;   comment = Temporary file space
;   path = /tmp
;   read only = no
;   public = yes

# A publicly accessible directory, but read only, except for people in
# the "staff" group
;
;   comment = Public Stuff
;   path = /home/samba
;   public = yes
;   read only = yes
;   write list = @staff

# Other examples.
#
# A private printer, usable only by fred. Spool data will be placed in fred's
# home directory. Note that fred must have write access to the spool directory,
# wherever it is.
;
;   comment = Fred's Printer
;   valid users = fred
;   path = /homes/fred
;   printer = freds_printer
;   public = no
;   writable = no
;   printable = yes

# a service which has a different directory for each machine that connects
# this allows you to tailor configurations to incoming machines. You could
# also use the %u option to tailor it by user name.
# The %m gets replaced with the machine name that is connecting.
;
;  comment = PC Directories
;  path = /usr/pc/%m
;  public = no
;  writable = yes

# A publicly accessible directory, read/write to all users. Note that all files
# created in the directory by users will be owned by the default user, so
# any user with access can delete any other user's files. Obviously this
# directory must be writable by the default user. Another user could of course
# be specified, in which case all files would be owned by that user instead.
;
;   path = /usr/somewhere/else/public
;   public = yes
;   only guest = yes
;   writable = yes
;   printable = no
《解決方案》

把相關的日誌發出來看看。




[火星人 via ] Samba 共享文件(夾)中文名比英文名 慢的問題已經有233次圍觀

http://www.coctec.com/docs/service/show-post-25069.html