vsftp 530 Permission denied 求助!

火星人 @ 2014-03-04 , reply:0
←手機掃碼閱讀

vsftp 530 Permission denied 求助!

chroot_local_user=YES
chroot_list_enable=YES
chroot_list_file=/data/webserver/vsftpd/nolock_user #不鎖定到主目錄的用戶

userlist_enable=YES
userlist_deny=NO
userlist_file=/data/webserver/vsftpd/allow_user #允許登陸的用戶

allow_user文件裡面 加上用戶名 user1
nolock_user文件裡面 不包含 user1的用戶

user1 主目錄是 /data/htdocs/user1

登陸的時候 提示
狀態:        連接建立,等待歡迎消息...
響應:        220 Welcome to FTP service.
命令:        USER user1
響應:        530 Permission denied.

看了許久文檔,就是不知道 錯誤在什麼地方

[ 本帖最後由 joyanhui 於 2009-12-19 15:52 編輯 ]
《解決方案》

# Example config file /etc/vsftpd/vsftpd.conf
#
# The default compiled in settings are fairly paranoid. This sample file
# loosens things up a bit, to make the ftp daemon more usable.
# Please see vsftpd.conf.5 for all compiled in defaults.
#
# READ THIS: This example file is NOT an exhaustive list of vsftpd options.
# Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's
# capabilities.
#
# Allow anonymous FTP? (Beware - allowed by default if you comment this out).
anonymous_enable=NO
#
# Uncomment this to allow local users to log in.
local_enable=YES
#
# Uncomment this to enable any form of FTP write command.
write_enable=YES
#
# Default umask for local users is 077. You may wish to change this to 022,
# if your users expect that (022 is used by most other ftpd's)
local_umask=022
#
# Uncomment this to allow the anonymous FTP user to upload files. This only
# has an effect if the above global write enable is activated. Also, you will
# obviously need to create a directory writable by the FTP user.
#anon_upload_enable=YES
#
# Uncomment this if you want the anonymous FTP user to be able to create
# new directories.
#anon_mkdir_write_enable=YES
#
# Activate directory messages - messages given to remote users when they
# go into a certain directory.
dirmessage_enable=YES
#
# The target log file can be vsftpd_log_file or xferlog_file.
# This depends on setting xferlog_std_format parameter
xferlog_enable=NO
#
# Make sure PORT transfer connections originate from port 20 (ftp-data).
connect_from_port_20=YES
#
# If you want, you can arrange for uploaded anonymous files to be owned by
# a different user. Note! Using "root" for uploaded files is not
# recommended!
#chown_uploads=YES
#chown_username=whoever
#
# The name of log file when xferlog_enable=YES and xferlog_std_format=YES
# WARNING - changing this filename affects /etc/logrotate.d/vsftpd.log
#xferlog_file=/var/log/xferlog
#
# Switches between logging into vsftpd_log_file and xferlog_file files.
# NO writes to vsftpd_log_file, YES to xferlog_file
xferlog_std_format=YES
#
# You may change the default value for timing out an idle session.
#idle_session_timeout=600
#
# You may change the default value for timing out a data connection.
#data_connection_timeout=120
#
# It is recommended that you define on your system a unique user which the
# ftp server can use as a totally isolated and unprivileged user.
#nopriv_user=ftpsecure
#
# Enable this and the server will recognise asynchronous ABOR requests. Not
# recommended for security (the code is non-trivial). Not enabling it,
# however, may confuse older FTP clients.
#async_abor_enable=YES
#
# By default the server will pretend to allow ASCII mode but in fact ignore
# the request. Turn on the below options to have the server actually do ASCII
# mangling on files when in ASCII mode.
# Beware that on some FTP servers, ASCII support allows a denial of service
# attack (DoS) via the command "SIZE /big/file" in ASCII mode. vsftpd
# predicted this attack and has always been safe, reporting the size of the
# raw file.
# ASCII mangling is a horrible feature of the protocol.
#ascii_upload_enable=YES
#ascii_download_enable=YES
#
# You may fully customise the login banner string:
ftpd_banner=Welcome to Joyanhui FTP service.
#
# You may specify a file of disallowed anonymous e-mail addresses. Apparently
# useful for combatting certain DoS attacks.
#deny_email_enable=YES
# (default follows)
#banned_email_file=/etc/vsftpd/banned_emails
#
# You may specify an explicit list of local users to chroot() to their home
# directory. If chroot_local_user is YES, then this list becomes a list of
# users to NOT chroot().
#chroot_list_enable=YES
# (default follows)
chroot_local_user=YES
chroot_list_enable=YES
chroot_list_file=/data/webserver/vsftpd/nolock_user
#
# You may activate the "-R" option to the builtin ls. This is disabled by
# default to avoid remote users being able to cause excessive I/O on large
# sites. However, some broken FTP clients such as "ncftp" and "mirror" assume
# the presence of the "-R" option, so there is a strong case for enabling it.
ls_recurse_enable=NO
#
# When "listen" directive is enabled, vsftpd runs in standalone mode and
# listens on IPv4 sockets. This directive cannot be used in conjunction
# with the listen_ipv6 directive.
listen=YES
#
# This directive enables listening on IPv6 sockets. To listen on IPv4 and IPv6
# sockets, you must run two copies of vsftpd whith two configuration files.
# Make sure, that one of the listen options is commented !!
#listen_ipv6=YES

pam_service_name=vsftpd
userlist_enable=YES
userlist_deny=NO
userlist_file=/data/webserver/vsftpd/allow_user
tcp_wrappers=YES

listen_port=2123
pasv_min_port=8500
pasv_max_port=8510
max_client=50

[ 本帖最後由 joyanhui 於 2009-12-19 15:57 編輯 ]
《解決方案》

搞清楚 匿名用戶, local user(也就是計算機/etc/passwd中的用戶), guest用戶(用資料庫存儲的用戶)。

userlist_enable=YES
userlist_deny=NO
userlist_file=/data/webserver/vsftpd/allow_user #允許登陸的用戶
+++++++++++
這些選項全是local user的選項,不要使用這些選項。使用 guest_enable=ok

guest 用戶的配置,參見置頂的精華文章。
《解決方案》

樓上的,很抱歉.

我就是用的local user 用戶啊
《解決方案》

其他命令可用嗎?
《解決方案》

listen_port=2123

你連接ftp的時候,埠是不是用的默認21
《解決方案》

allow_user文件裡面 加上用戶名 user1
《解決方案》

用戶的配置,參見置頂的精華文章。。。沒看到啊




[火星人 via ] vsftp 530 Permission denied 求助!已經有331次圍觀

http://www.coctec.com/docs/service/show-post-12401.html