[Boot] run nfsboot egiga0 no link port0 no link port1 no link port2 no link port3 no link port4 no link port5 no link port6 no link port7 no link port8 no link Using port9 device TFTP from server 192.168.1.20; our IP address is 192.168.1.254 Filename 'uImage'. Load address: 0x2000000 Loading: ################################################################# ################################################################# ################################################################# ######################################## done Bytes transferred = 1198340 (124904 hex) ## Booting image at 02000000 ... Image Name: Linux-2.6.22.18 Created: 2011-03-28 1:19:47 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 1198276 Bytes = 1.1 MB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK OK
Checking for Linux kernel endianess at 0x02000040 = 0xe1a00000 Linux Kernel is LE
Starting kernel in LE mode ... Uncompressing Linux................................................................................ done, booting the kernel. Linux version 2.6.22.18 (root@debian) (gcc version 3.4.4 (release) (CodeSourcery ARM 2005q3-2)) #1 Mon Mar 28 09:19:25 CST 2011 CPU: ARM926EJ-S [56251311] revision 1 (ARMv5TE), cr=00053977 Machine: Feroceon-KW Using UBoot passing parameters structure BoardID from uboot=10 Memory policy: ECC disabled, Data cache writeback calling iotable_init. MEM_TABLE= virt=0xe7800000, phys=0x07800000, lengh=0x00800000 virt=0xe8000000, phys=0xe8000000, lengh=0x08000000 virt=0xf1000000, phys=0xf1000000, lengh=0x00100000 virt=0xf8000000, phys=0xf8000000, lengh=0x01000000 virt=0xf4000000, phys=0xf4000000, lengh=0x04000000 virt=0xfb000000, phys=0xfb000000, lengh=0x00010000 virt=0xf2000000, phys=0xf2000000, lengh=0x00010000 Internal prestera id register = 0x000dc343 xCat revision = A1 CPU0: D VIVT write-back cache CPU0: I cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets CPU0: D cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets Built 1 zonelists. Total pages: 30480 Kernel command line: root=/dev/nfs rw nfsroot=192.168.1.20:/tftpboot/rootfs_arm-gnueabi ip=192.168.1.254:192.168.1.20::255.255.255.0::eth0:off console=ttyS0,115200 mtdparts=spi_flash:0x00100000(uboot)ro,0x001c0000(kernel),0x00d40000(rootfs) PID hash table entries: 512 (order: 9, 2048 bytes) Console: colour dummy device 80x30 Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) Memory: 120MB 0MB 0MB 0MB = 120MB total Memory: 119168KB available (2260K code, 194K data, 88K init) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok NET: Registered protocol family 16
Marvell Development Board (LSP Version KW_LSP_4.3.0.015)-- DB-98DX4122-48G Soc: 88F6281 A0 LE
Detected Tclk 200000000 and SysClk 320000000 Switch decoding windows init is done. MV Buttons Device Load PEX0 interface detected no Link. PCI: bus0: Fast back to back transfers enabled NET: Registered protocol family 2 Time: kw_clocksource clocksource has been installed. IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 4096 (order: 3, 32768 bytes) TCP bind hash table entries: 4096 (order: 2, 16384 bytes) TCP: Hash tables configured (established 4096 bind 4096) TCP reno registered RTC has been updated!!! RTC registered Use the XOR engines (acceleration) for enhancing the following functions: o RAID 5 Xor calculation o kernel memcpy o kenrel memzero Number of XOR engines to use: 2 MV Buttons Driver Load JFFS2 version 2.2. (NAND) ?? 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler anticipatory registered (default) Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33) is a 16550A serial8250.0: ttyS1 at MMIO 0xf1012100 (irq = 34) is a 16550A Loading Marvell Ethernet Driver: o Uncached descriptors in DRAM o DRAM SW cache-coherency o Multi RX Queue support - 8 RX queues o Multi TX Queue support - 8 TX Queues o TCP segmentation offload enabled o Receive checksum offload enabled o Transmit checksum offload enabled o Network Fast Processing (Routing) supported o Driver ERROR statistics enabled o Driver INFO statistics enabled o Proc tool API enabled o Rx descripors: q0=64 q1=64 q2=64 q3=64 q4=64 q5=64 q6=64 q7=64 o Tx descripors: q0=532 q1=532 q2=532 q3=532 q4=532 q5=532 q6=532 q7=532 o Loading network interface(s): o eth0, ifindex = 1, GbE port = 0
Warning: Giga 1 is Forced Skipped Off
mvFpRuleDb (c70f4000): 1024 entries, 4096 bytes NFTL driver: nftlcore.c $Revision: 1.98 $, nftlmount.c $Revision: 1.41 $ mvSFlashInit ERROR: Unknown SPI flash device! ERROR: sflash_probe - Failed to initialize the SFlash.Using Hamming 1-bit ECC for NAND device No NAND device found!!! mice: PS/2 mouse device common for all mice i2c /dev entries driver TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 eth0: started IP-Config: Complete: device=eth0, addr=192.168.1.254, mask=255.255.255.0, gw=255.255.255.255, host=192.168.1.254, domain=, nis-domain=(none), bootserver=192.168.1.20, rootserver=192.168.1.20, rootpath= Looking up port of RPC 100003/2 on 192.168.1.20 rpcbind: server 192.168.1.20 not responding, timed out Root-NFS: Unable to get nfsd port number from server, using default Looking up port of RPC 100005/1 on 192.168.1.20 rpcbind: server 192.168.1.20 not responding, timed out Root-NFS: Unable to get mountd port number from server, using default mount: server 192.168.1.20 not responding, timed out Root-NFS: Server returned error -5 while mounting /tftpboot/rootfs_arm-gnueabi VFS: Unable to mount root fs via NFS, trying floppy. List of all partitions: No filesystem could mount root, tried: jffs2 Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(2,0)
