ppp0 Link encap:Point-to-Point Protocol inet addr:220.160.5.128 P-t-P:192.168.203.1 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1492 Metric:1 RX packets:16 errors:28 dropped:0 overruns:0 frame:0 TX packets:3 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:3 RX bytes:662 (662.0 b) TX bytes:30 (30.0 b)
** Summary of what you entered **
Ethernet Interface: eth0 User name: 480065501@fzlan Activate-on-demand: No Primary DNS: 218.85.157.99 Secondary DNS: 202.101.98.55 Firewalling: NONE
>>> Accept these settings and adjust configuration files (y/n)? y Adjusting /etc/ppp/pppoe.conf Adjusting /etc/resolv.conf (But first backing it up to /etc/resolv.conf-bak) Adjusting /etc/ppp/pap-secrets and /etc/ppp/chap-secrets (But first backing it up to /etc/ppp/pap-secrets-bak) (But first backing it up to /etc/ppp/chap-secrets-bak)
Congratulations, it should be all set up!
Type 'pppoe-start' to bring up your PPPoE link and 'pppoe-stop' to bring it down. Type 'pppoe-status' to see the link status. [root@localhost src]# pppoe-start ................TIMED OUT /usr/sbin/pppoe-start: line 191: 5966 Terminated $CONNECT "$@" >/dev/null 2>&1
