Welcome to the ADSL client setup. First, I will run some checks on your system to make sure the PPPoE client is installed properly...
The following DSL config was found on your system:
Device: Name: ppp0 DSLppp0
Please enter the device if you want to configure the present DSL config (default ppp0) or enter 'n' if you want to create a new one: n
LOGIN NAME
Enter your Login Name: sy_lijingsh
INTERFACE
Enter the Ethernet interface connected to the ADSL modem For Solaris, this is likely to be something like /dev/hme0. For Linux, it will be ethX, where 'X' is a number. (default eth0): eth0
Do you want the link to come up on demand, or stay up continuously? If you want it to come up on demand, enter the idle time in seconds after which the link should be dropped. If you want the link to stay up permanently, enter 'no' (two letters, lower-case.) NOTE: Demand-activated links do not interact well with dynamic IP addresses. You may have some problems with demand-activated links. Enter the demand value (default no):
DNS
Please enter the IP address of your ISP's primary DNS server. If your ISP claims that 'the server will provide dynamic DNS addresses', enter 'server' (all lower-case) here. If you just press enter, I will assume you know what you are doing and not modify your DNS setup. Enter the DNS information here: 202.96.64.68 Please enter the IP address of your ISP's secondary DNS server. If you just press enter, I will assume there is only one DNS server. Enter the secondary DNS server address here: 202.96.69.38
PASSWORD
Please enter your Password: Please re-enter your Password:
USERCTRL
Please enter 'yes' (two letters, lower-case.) if you want to allow normal user to start or stop DSL connection (default yes): yes
FIREWALLING
Please choose the firewall rules to use. Note that these rules are very basic. You are strongly encouraged to use a more sophisticated firewall setup; however, these will provide basic security. If you are running any servers on your machine, you must choose 'NONE' and set up firewalling yourself. Otherwise, the firewall rules will deny access to all standard servers like Web, e-mail, ftp, etc. If you are using SSH, the rules will block outgoing SSH connections which allocate a privileged source port.
The firewall choices are: 0 - NONE: This script will not set any firewall rules. You are responsible for ensuring the security of your machine. You are STRONGLY recommended to use some kind of firewall rules. 1 - STANDALONE: Appropriate for a basic stand-alone web-surfing workstation 2 - MASQUERADE: Appropriate for a machine acting as an Internet gateway for a LAN Choose a type of firewall (0-2): 0
Start this connection at boot time
Do you want to start this connection at boot time? Please enter no or yes (default no):yes
** Summary of what you entered **
Ethernet Interface: eth0 User name: sy_lijingsh Activate-on-demand: No Primary DNS: 202.96.64.68 Welcome to the ADSL client setup. First, I will run some checks on your system to make sure the PPPoE client is installed properly...
The following DSL config was found on your system:
Device: Name: ppp0 DSLppp0 ppp1 DSLppp1
Please enter the device if you want to configure the present DSL config (default ppp0) or enter 'n' if you want to create a new one:
LOGIN NAME
Enter your Login Name (default sy_lijingsh):
INTERFACE
Enter the Ethernet interface connected to the ADSL modem For Solaris, this is likely to be something like /dev/hme0. For Linux, it will be ethX, where 'X' is a number. (default eth0):
Do you want the link to come up on demand, or stay up continuously? If you want it to come up on demand, enter the idle time in seconds after which the link should be dropped. If you want the link to stay up permanently, enter 'no' (two letters, lower-case.) NOTE: Demand-activated links do not interact well with dynamic IP addresses. You may have some problems with demand-activated links. Enter the demand value (default no):
DNS
Please enter the IP address of your ISP's primary DNS server. If your ISP claims that 'the server will provide dynamic DNS addresses', enter 'server' (all lower-case) here. If you just press enter, I will assume you know what you are doing and not modify your DNS setup. Enter the DNS information here: 202.96.64.68 Please enter the IP address of your ISP's secondary DNS server. If you just press enter, I will assume there is only one DNS server. Enter the secondary DNS server address here: 202.96.69.38
PASSWORD
Please enter your Password: Please re-enter your Password:
USERCTRL
Please enter 'yes' (two letters, lower-case.) if you want to allow normal user to start or stop DSL connection (default yes):
FIREWALLING
Please choose the firewall rules to use. Note that these rules are very basic. You are strongly encouraged to use a more sophisticated firewall setup; however, these will provide basic security. If you are running any servers on your machine, you must choose 'NONE' and set up firewalling yourself. Otherwise, the firewall rules will deny access to all standard servers like Web, e-mail, ftp, etc. If you are using SSH, the rules will block outgoing SSH connections which allocate a privileged source port.
The firewall choices are: 0 - NONE: This script will not set any firewall rules. You are responsible for ensuring the security of your machine. You are STRONGLY recommended to use some kind of firewall rules. 1 - STANDALONE: Appropriate for a basic stand-alone web-surfing workstation 2 - MASQUERADE: Appropriate for a machine acting as an Internet gateway for a LAN Choose a type of firewall (0-2): 2
Start this connection at boot time
Do you want to start this connection at boot time? Please enter no or yes (default no):
** Summary of what you entered **
Ethernet Interface: eth0 User name: sy_lijingsh Activate-on-demand: No Primary DNS: 202.96.64.68 Secondary DNS: 202.96.69.38 Firewalling: MASQUERADE User Control: yes Accept these settings and adjust configuration files (y/n)? Accept these settings and adjust configuration files (y/n)? y Adjusting /etc/sysconfig/network-scripts/ifcfg-ppp0 Adjusting /etc/resolv.conf Adjusting /etc/ppp/chap-secrets and /etc/ppp/pap-secrets (But first backing it up to /etc/ppp/chap-secrets.bak) (But first backing it up to /etc/ppp/pap-secrets.bak)
Congratulations, it should be all set up!
Type '/sbin/ifup ppp0' to bring up your xDSL link and '/sbin/ifdown ppp0' to bring it down. Type '/sbin/adsl-status /etc/sysconfig/network-scripts/ifcfg-ppp0' to see the link status.
[root@localhost ~]# [root@localhost ~]# /sbin/ifup ppp0 [root@localhost ~]# /sbin/adsl-status /etc/sysconfig/network-scripts/ifcfg-ppp0 adsl-status: Link is down (can't read pppoe PID file /var/run/pppoe-adsl.pid.pppoe) 然後就沒動靜了,我以為連上網了一開火狐,還是不行!還有兩張照片是我抓的紅旗的桌面
